D.O.O. Devel offer to You Heating controls, Cooling & Refrigeration controls, HVAC controls, LIFT controls, Electrical devices assembling, installation and technical support D.O.O. Devel vi offre controlli per il riscaldamento, la refrigerazione ed il clima, telecontrolli per gli ascensori, assemblaggio di schede elettroniche, installazione e supporto tecnico. D.O.O. Devel vam nudi kontrole grejanja, hlađenja, HVAC, daljinske kontrole za liftove, montažu elektronskih ploča, instalaciju i tehničku podršku

DED705 is a controller for absorbtion dryers; it drives four valves, two per column, in the proper logic to get the right sequence. It can work on time sequence or be equipped with a dewpoint sensor, 4-20 mA type in order to optimized the use of the two columns. One alarm output is present, as well as a digital input for remote ON/OFF and a serial RS485 port, implementing the ModBus protocol. A set of parameters can featuring the dryer. A 4,3 inches touch screen display with a symnotic representation of the operation status give a very user friendly interface.DED705 is a controller for absorbtion dryers; it drives four valves, two per column, in the proper logic to get the right sequence. It can work on time sequence or be equipped with a dewpoint sensor, 4-20 mA type in order to optimized the use of the two columns. One alarm output is present, as well as a digital input for remote ON/OFF and a serial RS485 port, implementing the ModBus protocol. A set of parameters can featuring the dryer. A 4,3 inches touch screen display with a symnotic representation of the operation status give a very user friendly interface.DED705 is a controller for absorbtion dryers; it drives four valves, two per column, in the proper logic to get the right sequence. It can work on time sequence or be equipped with a dewpoint sensor, 4-20 mA type in order to optimized the use of the two columns. One alarm output is present, as well as a digital input for remote ON/OFF and a serial RS485 port, implementing the ModBus protocol. A set of parameters can featuring the dryer. A 4,3 inches touch screen display with a symnotic representation of the operation status give a very user friendly interface.

DEH001 is a very powerful and simple temperature controller for domestic application. It consists of two parts: the user interface display that can be placed on the wall and the power unit that must be placed in the heating system. It controls the room temperature, the water maximum pressure, the status of the pump, the maximum temperature of water and the maximum supplied energy. Equipped with a GSM industrial mobile, it can be programmed remotely and can send via sms all the main informations about the heating system status. Besides, two daily programs can be settled and applied to the…DEH001 is a very powerful and simple temperature controller for domestic application. It consists of two parts: the user interface display that can be placed on the wall and the power unit that must be placed in the heating system. It controls the room temperature, the water maximum pressure, the status of the pump, the maximum temperature of water and the maximum supplied energy. Equipped with a GSM industrial mobile, it can be programmed remotely and can send via sms all the main informations about the heating system status. Besides, two daily programs can be settled and applied to the…DEH001 is a very powerful and simple temperature controller for domestic application. It consists of two parts: the user interface display that can be placed on the wall and the power unit that must be placed in the heating system. It controls the room temperature, the water maximum pressure, the status of the pump, the maximum temperature of water and the maximum supplied energy. Equipped with a GSM industrial mobile, it can be programmed remotely and can send via sms all the main informations about the heating system status. Besides, two daily programs can be settled and applied to the…

DEH010 is small board to insert into a water heating resistor up to 2KW. The temperature can be set via a potentiometer and, through a triac, the board controls the energy to the heating resistor. A led shows the ON/OFF status of heater.DEH010 is small board to insert into a water heating resistor up to 2KW. The temperature can be set via a potentiometer and, through a triac, the board controls the energy to the heating resistor. A led shows the ON/OFF status of heater.DEH010 is small board to insert into a water heating resistor up to 2KW. The temperature can be set via a potentiometer and, through a triac, the board controls the energy to the heating resistor. A led shows the ON/OFF status of heater.

DEH011 is a low energy, microprocessor based, thermostat supplied without housing, that can be placed inside any kind of electrical heating system up to 2,5 Kw or heating radiator, in the front panel of it and covered with a polycarbonate label. It has a 4 digits blue display and two push buttons. Using the buttons operator can set the wanted temperature between 10 an 30 °C as well as put the thermostat in OFF or FROST PROTECTION status or enter in parameter programming. A proportional-integral routine controls the accurate reaching of temperature setpoint. In parallel, a second software control limits…DEH011 is a low energy, microprocessor based, thermostat supplied without housing, that can be placed inside any kind of electrical heating system up to 2,5 Kw or heating radiator, in the front panel of it and covered with a polycarbonate label. It has a 4 digits blue display and two push buttons. Using the buttons operator can set the wanted temperature between 10 an 30 °C as well as put the thermostat in OFF or FROST PROTECTION status or enter in parameter programming. A proportional-integral routine controls the accurate reaching of temperature setpoint. In parallel, a second software control limits…DEH011 is a low energy, microprocessor based, thermostat supplied without housing, that can be placed inside any kind of electrical heating system up to 2,5 Kw or heating radiator, in the front panel of it and covered with a polycarbonate label. It has a 4 digits blue display and two push buttons. Using the buttons operator can set the wanted temperature between 10 an 30 °C as well as put the thermostat in OFF or FROST PROTECTION status or enter in parameter programming. A proportional-integral routine controls the accurate reaching of temperature setpoint. In parallel, a second software control limits…

DEH020 is a simple and easy to use thermostat. It is realized inside a plastic housing with plugs suitable to insert directly in the main power socket. A knob on the front cover of the thermostat allows to fix the wanted temperature between 5 and 35 °C. A 3 wires (or 5 wires) cable connects thermostat to the heating system.DEH020 is a simple and easy to use thermostat. It is realized inside a plastic housing with plugs suitable to insert directly in the main power socket. A knob on the front cover of the thermostat allows to fix the wanted temperature between 5 and 35 °C. A 3 wires (or 5 wires) cable connects thermostat to the heating system.DEH020 is a simple and easy to use thermostat. It is realized inside a plastic housing with plugs suitable to insert directly in the main power socket. A knob on the front cover of the thermostat allows to fix the wanted temperature between 5 and 35 °C. A 3 wires (or 5 wires) cable connects thermostat to the heating system.