D.O.O. Devel offer to You Heating controls, Cooling & Refrigeration controls, HVAC controls, LIFT controls, Electrical devices assembling, installation and technical support D.O.O. Devel vi offre controlli per il riscaldamento, la refrigerazione ed il clima, telecontrolli per gli ascensori, assemblaggio di schede elettroniche, installazione e supporto tecnico. D.O.O. Devel vam nudi kontrole grejanja, hlađenja, HVAC, daljinske kontrole za liftove, montažu elektronskih ploča, instalaciju i tehničku podršku
ProductsProdottiProizvodi
REK31REK31REK31
REK31 is a digital controller with 3 digits display, panel mounted, for cooling applications. A PTC or NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C. Assembled inside a 4 DIN modules housing suitable for an omega clamp. A power set of parameters allows the action for cooling or heating. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/2 Hp. It can accept the most common power supplies.REK31 is a digital controller with 3 digits display, panel mounted, for cooling applications. A PTC or NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C. Assembled inside a 4 DIN modules housing suitable for an omega clamp. A power set of parameters allows the action for cooling or heating. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/2 Hp. It can accept the most common power supplies.REK31 is a digital controller with 3 digits display, panel mounted, for cooling applications. A PTC or NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C. Assembled inside a 4 DIN modules housing suitable for an omega clamp. A power set of parameters allows the action for cooling or heating. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/2 Hp. It can accept the most common power supplies.
Appliances: Primena: Applicazioni: Small cooling systems, where defrost is obtained switching off the compressor.Small cooling systems, where defrost is obtained switching off the compressor.Small cooling systems, where defrost is obtained switching off the compressor.
-
Power supply:NapajanjeAlimentazione
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
Housing: Kućište: Contenitore: ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel.). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel.). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel.). Blocked with a plastic clamp.
REK31EREK31EREK31E
REK31E is a digital controller with 3 digits display, panel mounted, for cooling applications. A PTC or NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3 Hp. It can accept the most common power supplies.REK31E is a digital controller with 3 digits display, panel mounted, for cooling applications. A PTC or NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3 Hp. It can accept the most common power supplies.REK31E is a digital controller with 3 digits display, panel mounted, for cooling applications. A PTC or NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3 Hp. It can accept the most common power supplies.
Appliances: Primena: Applicazioni: Cooling systems, where defrost is obtained switching off the compressor .Cooling systems, where defrost is obtained switching off the compressor .Cooling systems, where defrost is obtained switching off the compressor .
-
Power supply:NapajanjeAlimentazione
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
Housing: Kućište: Contenitore: ABS plastic, self extinguishing, suitable for 29x 68 mm hole (32 x 74 mm panel.). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29x 68 mm hole (32 x 74 mm panel.). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29x 68 mm hole (32 x 74 mm panel.). Blocked with a plastic clamp.
REK31EAREK31EAREK31EA
REK31EA is a digital controller with 3 digits display, back panel mounted, for cooling applications. One NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C for cell. Assembled into an open board, it is suitable for back panel solutions. A fixed set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3HP. The setpoint can be changed by a knob. Suitable for small applications. It can accept the most common power supplies.REK31EA is a digital controller with 3 digits display, back panel mounted, for cooling applications. One NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C for cell. Assembled into an open board, it is suitable for back panel solutions. A fixed set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3HP. The setpoint can be changed by a knob. Suitable for small applications. It can accept the most common power supplies.REK31EA is a digital controller with 3 digits display, back panel mounted, for cooling applications. One NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C for cell. Assembled into an open board, it is suitable for back panel solutions. A fixed set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3HP. The setpoint can be changed by a knob. Suitable for small applications. It can accept the most common power supplies.
Appliances: Primena: Applicazioni: Small cooling systems, where defrost is obtained switching off the compressor.Small cooling systems, where defrost is obtained switching off the compressor.Small cooling systems, where defrost is obtained switching off the compressor.
-
Power supply:NapajanjeAlimentazione
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
Housing: Kućište: Contenitore: Open board, need to be installed inside a panel.Open board, need to be installed inside a panel.Open board, need to be installed inside a panel.
REK31EDREK31EDREK31ED
REK31ED is a digital controller with 3 digits display, panel mounted, for cooling applications. Two PTC or NTC sensor allow very accurate measurements of a temperature between –50 and + 90 °C, both for cell and evaporator. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3 Hp. It can accept the most common power supplies.REK31ED is a digital controller with 3 digits display, panel mounted, for cooling applications. Two PTC or NTC sensor allow very accurate measurements of a temperature between –50 and + 90 °C, both for cell and evaporator. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3 Hp. It can accept the most common power supplies.REK31ED is a digital controller with 3 digits display, panel mounted, for cooling applications. Two PTC or NTC sensor allow very accurate measurements of a temperature between –50 and + 90 °C, both for cell and evaporator. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A power set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3 Hp. It can accept the most common power supplies.
Appliances: Primena: Applicazioni: Cooling systems, where defrost is obtained stopping the compressor.Cooling systems, where defrost is obtained stopping the compressor.Cooling systems, where defrost is obtained stopping the compressor.
-
Power supply:NapajanjeAlimentazione
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
Housing: Kućište: Contenitore: ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel). Blocked with a plastic clamp.
REK31EEREK31EEREK31EE
REK31EE is a digital controller with 3 digits display, panel mounted, for cooling applications. One NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C for cell. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A short set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3HP. Suitable for small applications. It can accept the most common power supplies.REK31EE is a digital controller with 3 digits display, panel mounted, for cooling applications. One NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C for cell. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A short set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3HP. Suitable for small applications. It can accept the most common power supplies.REK31EE is a digital controller with 3 digits display, panel mounted, for cooling applications. One NTC sensor allows very accurate measurements of temperatures between –50 and + 90 °C for cell. Assembled inside a housing suitable for 29 x 68 mm hole in the panel. A short set of parameters allows the control of the compressor and defrost of cooling systems up to 1/3HP. Suitable for small applications. It can accept the most common power supplies.
Appliances: Primena: Applicazioni: Small cooling systems, where defrost is obtained switching off the compressor.Small cooling systems, where defrost is obtained switching off the compressor.Small cooling systems, where defrost is obtained switching off the compressor.
-
Power supply:NapajanjeAlimentazione
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
- Selectable between:
- 230Vac +/-10%, 50-60Hz
- 115Vac +/-10%, 50-60Hz
Housing: Kućište: Contenitore: ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel). Blocked with a plastic clamp.ABS plastic, self extinguishing, suitable for 29 x 68 mm hole (32 x 74 mm panel). Blocked with a plastic clamp.
contactcontattokontakt
SEDE LEGALEHEAD QUARTERSEDIŠTE
Braće Gavrilovića 15, 11273 Beograd, SerbiaMon-Fri: 8am-5pmPon-Pet: 08-17hLun-Ven: 08-17
closed on Saturday and Sundaychiuso Sabato e Domenicazatvoreno subotom i nedeljom